Name: 02E927770AL Complete Gearbox Mechatronics DSG-6 DQ250
Brand: Temic
Price: 849.9 EUR
Availability: OutOfStock

Transmission Type 6-Speed DSG DQ250

Condition Used - Fully Functional

Original Equipment OEM Quality - TEMIC

Warranty 12 Months

🆓 FREE Software Upload Service! We can upload software to the DSG mechatronics for your car according to the VIN number. Please write the VIN number to us in the order notes, or send it to the email: [email protected]

📋 OEM Reference Numbers

Compatible OEM Part Numbers:

02E927770AL • 02E300053D • 02E927770AQ • 02E325025AL • 02E927770AN • TEMIC 00406403A2 • 02E927770AO • 02E300054J • 02E927770AS

⚠️ Compatibility Verification Required Before placing your order, please confirm that the part number on your existing mechatronics unit matches one of the OEM numbers shown above. This verification guarantees complete compatibility with your vehicle's transmission system.

🔧 Technical Specifications

Transmission Type

6-Speed DSG Automatic DQ250 (02E)

Component Type

Complete Mechatronics System with Valve Body

Manufacturer

TEMIC (Original Equipment)

Maximum Torque

Up to 400 Nm

Part Condition

Used - Tested & Fully Functional

Warranty Period

12 Months

📝 Product Description

This original used component is a complete mechatronics system for the 6-speed DSG-6 DQ250 automatic transmission. Designed for Volkswagen Group vehicles, this assembly includes both the electronic control unit (TCU) and the integrated hydraulic valve body with all control solenoids and sensors required for transmission operation.

The complete mechatronics system manages all hydraulic and electronic functions essential for seamless gear changes and optimal transmission performance. It governs shift patterns, clutch engagement timing, hydraulic pressure regulation, and real-time sensor monitoring. Each complete assembly undergoes rigorous functional testing to ensure reliable operation before dispatch.

Key Features:

Original Equipment Quality: TEMIC manufactured to meet factory specifications
Comprehensive Testing: Every unit undergoes full diagnostic testing prior to dispatch
Complete Assembly: Includes control unit and complete valve body with all solenoids
Free VIN Programming: Complimentary software upload service available upon request
12-Month Coverage: Full warranty protection included for your confidence

🚗 Vehicle Compatibility

The following models equipped with 6-speed DSG DQ250 transmission (maximum torque 400 Nm) are compatible with this mechatronics unit:

Volkswagen Models

VW Beetle (2009 - 2019)
VW Caddy (2009 - 2022)
VW Eos (2009 - 2015)
VW Golf / Golf Plus / GTI (2004 - 2022)
VW Jetta / Jetta Wagon (2005 - 2022)
VW Passat / CC (2008 - 2020)
VW Scirocco (2008 - 2017)
VW Sharan (2008 - 2022)
VW Tiguan (2008 - 2017)
VW Touran (2004 - 2022)

Audi Models

Audi A3 (2003 - 2022)
Audi Q3 (2011 - 2018)
Audi TT (2003 - 2018)

SEAT Models

SEAT Alhambra (2008 - 2022)
SEAT Altea / Altea XL (2004 - 2022)
SEAT Leon (2005 - 2022)
SEAT Toledo (2004 - 2011)

Škoda Models

Škoda Octavia (2004 - 2022)
Škoda Superb (2008 - 2020)
Škoda Yeti (2009 - 2017)

⚠️ Important Compatibility Note This mechatronics unit is designed specifically for 6-speed DSG DQ250 transmissions with maximum torque capacity of 400 Nm. Always verify the exact part number on your current unit before ordering. Engine specifications and production years may affect compatibility. Contact us with your VIN for verification if uncertain.

⚠️ Common Fault Codes Resolved

A faulty DSG mechatronics system typically generates the following diagnostic trouble codes (DTCs). Replacing the defective complete assembly resolves these issues:

P0716 (17100) - Transmission input speed sensor signal implausible
P0722 (17106) - Output speed sensor no signal
P0746 (17130) - Pressure control valve 1 circuit malfunction
P0751 (17135) - Shift solenoid 1 electrical fault
P0756 (17140) - Shift solenoid 2 electrical fault
P0761 (17145) - Shift solenoid 3 electrical fault
P0766 (17150) - Shift solenoid 4 electrical fault
P0771 (17155) - Shift solenoid 5 circuit issue
P0776 (17160) - Pressure control valve 2 circuit malfunction
P174A (10739) - Valve 3 sub-transmission 1 electrical fault
P174E (10740) - Valve 3 sub-transmission 2 electrical fault
P1740 (18148) - Clutch temperature monitoring fault
P1746 (18154) - Solenoid valve supply voltage issue
P1793 (18201) - Output speed sensor 2 no signal
P2723 (19155) - Pressure control valve 5 circuit malfunction
P2732 (19164) - Pressure control valve 6 circuit malfunction
P2767 - Input speed sensor 2 no signal

Typical Symptoms of Complete Mechatronics System Failure:

Complete loss of drive or intermittent transmission operation
Harsh gear changes or delayed shift response
Transmission warning light illuminated on dashboard
Vehicle stuck in one gear (limp mode)
Gear selection problems or inability to engage certain gears
Unusual grinding or clunking noises during gear changes
Jerking or hesitation during acceleration

🔨 Installation & Programming Information

💡 Professional Installation Recommended Complete DSG mechatronics replacement requires specialized knowledge and diagnostic equipment. We strongly recommend having the installation performed by a qualified technician experienced with DSG transmission systems.

Installation Process:

Transmission Fluid Drain: Drain transmission fluid before removing complete mechatronics assembly
Careful Removal: Disconnect electrical connectors from control unit carefully
Clean Installation: Ensure valve body mounting surface is clean before installing replacement assembly
Torque Specifications: Follow manufacturer's torque specifications for all fasteners
Fluid Refill: Refill with correct DSG transmission fluid to specified level
Diagnostic Scan: Clear fault codes and perform adaptation procedures using diagnostic tool

Programming & Software:

Original Software Retained: The control unit maintains its original programming
VIN-Specific Upload Available: We offer free software upload tailored to your vehicle's VIN
Adaptation May Be Required: Some vehicles require basic adaptation after installation
No Dealer Coding Needed: Typically no dealer-level programming required

⚠️ Important Installation Note The complete mechatronics assembly is a heavy and delicate component combining electronics and hydraulics. Exercise extreme care during handling and transport to prevent damage. We recommend using secure packaging with adequate cushioning when shipping for repair or replacement.

❓ Why Complete DSG Mechatronics Systems Fail

Complete DSG mechatronics assemblies are complex electro-hydraulic systems operating under demanding conditions. Common failure causes include:

Electronic Component Degradation: Circuit boards and sensors deteriorate due to heat exposure and vibration
Solenoid Valve Failure: Electromagnetic valves controlling hydraulic pressure wear out over time
Contaminated Transmission Fluid: Dirty fluid causes internal component damage and valve sticking
Moisture Ingress: Water contamination corrodes electronic components and circuits
Manufacturing Defects: Some units experience premature failure due to design weaknesses
Overheating: Excessive heat from aggressive driving or heavy loads damages electronics
High Mileage Wear: Normal wear and tear over extended vehicle use

✓ Quality Assurance & Warranty

12-Month Comprehensive Warranty Every complete mechatronics assembly is covered by our 12-month warranty, giving you confidence in your purchase. All assemblies undergo rigorous testing to verify full functionality before shipping.

🆓 Free Software Upload Service

VIN-Specific Programming Available We offer complimentary software upload to the control unit tailored specifically to your vehicle's VIN number. This ensures optimal compatibility and performance with your exact vehicle configuration.

How to Request Software Upload:

Include your complete 17-character VIN in the order notes when purchasing
Alternatively, email your VIN to: [email protected]
Reference your order number in the email subject line
We will program the control unit to match your vehicle before shipping

💡 Why VIN Programming Matters Different engine variants, transmission ratios, and vehicle configurations require specific software parameters. VIN-matched programming ensures the control unit operates optimally with your exact vehicle setup.

📞 Need Help or Have Questions?

Our team is ready to assist you with:

Part number verification and compatibility confirmation
VIN-specific software upload requests
Technical specifications and installation guidance
Diagnostic trouble code interpretation
Bulk orders and special pricing
Warranty claims and support

Email: [email protected]

Contact Us for More Information

⚠️ Important Notes

Please Read Before Ordering:

This is a used component that has been tested and verified to be in fully functional condition
Always verify the part number matches your existing mechatronics assembly before ordering
Professional installation with diagnostic equipment is strongly recommended
Transmission fluid replacement is required during installation
Basic adaptation procedures may be needed after installation
Free VIN-specific software upload available - provide VIN in order notes or via email
Check your country's VAT regulations - prices may vary depending on your location

02E927770AL Complete Gearbox Mechatronics DSG-6 DQ250